Products

 

NCL-8-SPW-LSM8

Contact us for Pricing

 

NEMA Type 1 lockable enclosure 36″ high by  24″ wide by 5″ deep, Semi Pre-Wired (SPW). Pre-Wired for board power, RS-485 communications and door control for up to four boards (EP-1502, MR-52, MR-16IN & MR-16OUT). Field connected by 1 1/2″-2″ and 1/2″ knock outs, as installation requires. Door is removable and includes two standard 217 key way locks with two keys, Tamper switch, metal quick reference pocket and mounting hardware pack for access control modules. Finish – cool grey powder coat inside and out.

Click here for a detailed picture of the lower half of the NCL-8SPW-LSM8 enclosure.

Includes:

  • One LifeSafety FPO250 250w Power Supply set at 3A/24v w/fire alarm interface
  • One B100 Secondary Power Supply 5-18V at 4A max Class 2 power limited output
  • M8 8 Output smart distribution module fused 3A per Output
  • NL4 4 port network monitoring module
  • DL1 Data link cable/software kit
  • One “X3” wire management system with cover

 


 

NCL-MAX8-LS

Also available in MAX12

Contact us for Pricing

 

NEMA Type 1 (non-rated) lockable enclosure 30″ high by 30″ wide by 8″ deep, Pre-wired for up to one MINI-SCPE or EP-2500 and four MR-52’s. Field connected by 2″ and 1/2-3/4″ concentric knock-outs, as installation requires. Each enclosure comes with removable pre-wired back panel fabricated from 16 gauge steel. Panel dimensions 28″ high 28″ wide by 1/2″ deep, Flanged on four sides with four holes one in each corner and includes a standard 217 key way with two keys. Finish – Cool grey powder coat inside and out.

 Includes:

  • One Lifesafty FPO75 75W Power Supply 6A/12V
  • One FPO250 250W Power supply 10A/24V with built in Fire Alarm Interface and Power fail

NOTE:

  • Recommended three BAT-70 7.0 Ah, 12 Volt Batteries – sold separately
  • Does not accept EP-1502
  • Enclosures now includes cost for special protective packaging and a small (5%) increase related to raw material (primarily steel)

WARNING: Lock Output Power is set to 24VDC (12 VDC optional – Field Converted)

 


 

NCL-MAX8-LSNL4

Also available in MAX12

Contact us for Pricing

 

NEMA Type 1 (non-rated) lockable enclosure 30″ high by 30″ wide by 8″ deep, Pre-wired for up to one MINI-SCPE or EP-2500 four MR-52’s. Field connected by 2″ and 1/2-3/4″ concentric knock-outs, as installation requires. Each enclosure comes with removable pre-wired back panel fabricated from 16 gauge steel. Panel dimensions 28″ high by 28″ wide by 1/2″ deep, Flanged on four sides with four holes one in each corner and includes a standard 217 key way with two keys. Finish – Cool grey powder coat inside and out.

Includes:

  • One Lifesafty FPO75 75W Power Supply at 6A/12V
  • One FPO250 250W Power supply 10A/24V with built in Fire Alarm Interface and Power fail
  • One NL4 4 port Network Monitoring Module
  • One DL1 Data Link Cable/software kit.

NOTE:

  • Recommended three BAT-70 7.0 Ah, 12 Volt Batteries – sold separately
  • Does not accept EP-1502
  • Enclosures now includes cost for special protective packaging and a small (5%) increase related to raw material (primarily steel)

WARNING: Lock Output Power is set to 24VDC (12 VDC optional – Field Converted)

 

 


 

NCL-MAX8-EP-LS

Also available in MAX12

Contact us for Pricing

 

NEMA Type 1 (non-rated) lockable enclosure 30″ high by 30″ wide  by 8″ deep, Pre-wired for up to one EP-1502 and three MR-52’s. Field connected by 2″ and 1/2-3/4″ concentric knock-outs, as installation requires. Each enclosure comes with removable pre-wired back panel fabricated from 16 gauge steel. Panel dimensions 28″ high by 28″ wide by 1/2″ deep, Flanged on four sides with four holes one in each corner and includes a standard 217 key way with two keys. Finish – Cool grey powder coat inside and out.

Includes:

  • One Lifesafty FPO75 75W Power Supply 6A/12V
  • One FPO250 250W Power supply 10A/24V with built in Fire Alarm Interface and Power fail

NOTE:

  • Recommended three BAT-70 7.0 Ah, 12 Volt Batteries – sold separately
  • Does not accept EP-1502
  • Enclosures now includes cost for special protective packaging and a small (5%) increase related to raw material (primarily steel)

 

WARNING: Lock Output Power is set to 24VDC (12 VDC optional – Field Converted)

 

 


 

NCL-MAX8-EP-LSNL4

Also available in MAX12

Contact us for Pricing

 

NEMA Type 1 (non-rated) lockable enclosure 30″ high by 30″ wide by 8″ deep, pre-wired for up to one EP-1502 and three MR-52’s. Field connected by 2″ and 1/2-3/4″ concentric knock-outs, as installation requires. Each enclosure comes with removable pre-wired back panel fabricated from 16 gauge steel. Panel dimensions 28″ high by 28″ wide by 1/2″ deep, Flanged on four sides with four holes one in each corner and includes a standard 217 key way with two keys. Finish – Cool grey powder coat inside and out.

Includes:

  • One Lifesafty FPO75 75W Power Supply 6A/12V
  • One FPO250 250W Power supply 10A/24V with built in Fire Alarm Interface and Power fail
  • One NL4 4 port Network Monitoring Module
  • One DL1 Data Link Cable/software kit.

NOTE:

  • Recommended three BAT-70 7.0 Ah, 12 Volt Batteries – sold separately
  • Does not accept EP-1502
  • Enclosures now includes cost for special protective packaging and a small (5%) increase related to raw material (primarily steel)

WARNING: Lock Output Power is set to 24VDC (12 VDC optional – Field Converted)

 

 


 

Home

Contact

About Us

Products

Links

 Site Map